Showing posts with label restore. Show all posts
Showing posts with label restore. Show all posts

K&N Air Filter Recharge Kit

It has been a while since anything has been posted up on the blog, but that doesn't mean work hasn't been going on.

The first of many items on the to do list was to fully clean out the K and N panel air filter. I bought a K and N recharger kit to do the job properly.





Bonnet up, filter out, first inspections show quite a lot of crap had got itself lodged in the filter. Plenty of bugs for that matter.

In the picture below you can still see some of the crap that was in it, but unfortunately I forgot to take a picture of it to show the full extent, nevertheless still dirty.



Using a soft bristled brush I gently removed majority of the looser large dirt particles.



Next up was to put liberally spray on the air filter cleaner, and leave to soak for 10 minutes. After that I rinsed it with fresh water and then repeated the process just to make sure.

You are supposed to leave the filter to dry naturally, but these things really hold water. I left it over night and it was still soaking, so I moved it indoors near to the fire and left for another whole day. It was still a tiny bit damp in places, the next day, but it'll do.

Finally you just have to spray on the air filter oil. This is how it looked all cleaned up and re-oiled.




Whilst I was performing this process I replaced the K and N with an old paper filter. The difference is most definitely noticeable upon refitting of the K and N, justifying my recommendation to buy one if you haven't already.




X-Power Caliper Vinyls and Brake Paint Refurb

Due to the impending refurb of my spare set of alloys, I wanted to tidy up the brake/wheel area.

Using some Halfords Brake Cleaner I got most of the crap off the calipers, then took a wire brush to them, and finally sanded the main face. I sanded the main face ready for the white X-Power vinyl decals I acquired to go there.

I got the vinyls from a member of theMGZR.co.uk (Dazzer) who runs his own custom vinyl business, very nice chap. Got them specially made up the right size for the 1.4 calipers.


I repainted the calipers in the same Hammerite smooth red as before.



The calipers needed two coats of paint to get them looking as good as they could be, wanted to give them a good going over so they last a fair while.

Whilst I was there I noticed my new mintex discs had gone rusty in the non contact areas. This was making the wheel area look very untidy. So I painted them with black engine enamel, which not only covers up the rust but should prevent any more rusting.

All in all the wheel/brake area looks a treat now, makes it look very fresh and a bit sportier/newer.

(Note: In the pictures the before shots are of the opposite side to the finished shots as I forgot to take pictures of the process on just one side.)


Before 




Painted



Applying the Vinyl



Finished



Finished - Wheels On